Broadcast | Cable | IPTV | OTT | SAT | DataMiner
EuroMedia-Service Partners RF-Design RLC2xxL Line amplifier
RF-Design´s RLC22xxL are 1:1 redundant operating line amplifier units with rear-side integrated 8:1 or 16:1 L-Band combiners built into a 1RU/19" chassis. The units features 8:1 or 16:1 L-Band combining while the two redundant operating amplifiers allow variable gain-adjustment so to reach best RF performance within the network. Besides the variable gain adjustment and 8:1 or 16:1 combining the units also features slope equalization, 10MHz external reference, RF power monitoring, switch LNB-supply as well as 1:1 redundant dual power-supply. The RLC2xxL units represent flexible and compact RF distribution & amplification systems perfectly suited for use in Teleports, Satellite Earth Stations, as well as Broadcast- and Broadband facilities wherever accurate RF power, highest stability and availability is necessary. The units have a front-side LC-Display/keypads for local configuration while front-side status LED´s indicating amplifier and power-supply status. Remote configuration can be done via the Ethernet-Interface (WebGUI, SNMP).
Additional product information
| Datasheet | Download |
RLC2708L |
RLC2716L |
|
|
RLC2708L |
RLC2716L |
|
| Dimensions: | 1RU/19", 260mm deep | 1RU/19", 260mm deep |
| Power supply: | 85...230V, 50/60Hz | 85...230V, 50/60Hz |
| 1:1 redundant (hot-swappable) | 1:1 redundant (hot-swappable) | |
| Power consumption: | <10W | <10W |
| Frequency range: | 950...2150MHz (L-Band) | 950...2150MHz (L-Band) |
| Input/Output connectors: | 50Ohm SMA(f) or 75Ohm F(f) | 50Ohm SMA(f) or 75Ohm F(f) |
| Input Return-Loss: | 14dB min. | 14dB min. |
| Output Return-Loss: | 18dB min. | 18dB min. |
| Flatness: | ±0.5dB typ., ±1dB max. | ±0.5dB typ., ±1dB max. |
| Variable Gain adjust: | -7...+17dB (Acc. ±0.25dB) | -11...+13dB (Acc. ±0.25dB) |
| 1dB steps (MGC/AGC) | 1dB steps (MGC/AGC) | |
| Slope equalization: | 0...9dB, 1dB steps | 0...9dB, 1dB steps |
| Max. RF output power: | +13dBm (50Ohm) / +11dBm (75Ohm) | +9dBm (50Ohm) / +7dBm (75Ohm) |
| Noise figure: | 5dB @ 17dB gain | 5dB @ 13dB gain |
| IMA3 @ +10dBm: | < -36dBc | < -36dBc |
| 1dB Compression point: | +13dBm | +10dBm |
| Output limiter: | adjustable -40dBm...+0dBm) | adjustable -40dBm...+0dBm |
| Combiner configuration: | 8:1 | 16:1 |
| Input Isolation: | >= 25dB (50Ohm) / >= 20dB (75Ohm) | >= 25dB (50Ohm) / >= 20dB (75Ohm) |
| Monitoring port: | -20dB (front-side) | -20dB (front-side) |
| 10MHz reference: | External, rear 50Ohm SMA(f) | External, rear 50Ohm SMA(f) |
| (via input port 1) | (via input port #1) | |
| Switchable LNB-supply: | 13/15/18V, 22kHz, 400mA | 13/15/18V, 22kHz, 400mA |
| (via input port 1) | (via input port 1) | |
| Access/Control: | LC-Display/keypads, | LC-Display/keypads, |
| 100Mbit Ethernet-Interface, | 100Mbit Ethernet-Interface, | |
| RS232/485 | RS232/485 | |
| (WEB-GUI, SNMPv2c) | (WEB-GUI, SNMPv2c) | |
| Status LED's: | Amplifier & PSU monitoring | Amplifier & PSU monitoring |
| Operating temperature: | 0...45°C | 0...45°C |
| Storage temperature: | -10°C...70°C | -10°C...70°C |
| Humidity: | 90% non-condensing | 90% non-condensing |
| RoHS: | Compliant | Compliant |